Utilicor Technologies MD-300
Understructure: 6”@10.5lb/ft structural channel sills, running the full deck length with six bolt-on hold-down assemblies.
Decking: Full 1/8” decking, 96” wide, running the full length of the bed with formed structural deck reinforcements.
Coring and Manipulator Assembly: Fully manoeuvrable Traversacor™ core-zone extension system (Patented) which allows the core drill to extend up to 12” out from the back of the truck and travel the full width of the deck, giving the crew the flexibility to core anywhere within a 24 square foot area behind the truck without repositioning the vehicle. 12” to 24” diameter wet drilling core bit capacity with linear glide system and proportional orbital hydraulic drum feed system.
Water System: 100 USG plastic water tank.Hydraulically driven high-pressure water pump, 5.5 G.P.M. @ 1500 P.S.I. with 15 ft of 3/8” hose and high-pressure handgun.Electric water pump, 3 G.P.M. @ 30 P.S.I. and includes 1/2” diameter water hose running to gland assembly on cutter drive shaft for cooling of cutter head and additional hose for cleaning and cooling outside of cutter.
Stabilizers: Two rear mounted hydraulic stabilizer legs.
Drive system: Power take-off installed on truck transmission.
Hydraulic System: Hydraulic load sense pump, drive line mounted to PTO with MH3 HydraPak hydraulic cooling system complete with15 gallon hydraulic reservoir. Includes suction and return lines, sight glass, temperature gauge, fill port, drain port and oil filter.
Control System: Plug in remote pendant control with 15 foot cable extension for operation of manipulator/cutter assembly and stabilizers, with boom-mounted control panel emergency shutdown switch, and digital coring drum R.P.M. read out.
Tool Boxes: (Optional) 5 deck mounted tool boxes. (2 underdeck 84” L x 20” H x 20” D) (2 deck mounted x 84” L x 34” H x 18” D) (1x deck mounted 36” x 17” x 18”) and open deck mounted storage area.
Paint Sand blasted, powder coated primer and finish coat (50% gloss black).
Included: Traffic cone carrier and spare drum carrier installed on the deck. Dual LED flashing amber strobe lights
Basic Coring Package (extra): ProCor diamond segment coring drum with “A” flange drive adapter, steel pilot shaft, bi-cone pilot bit or tri-tooth carbide pilot bit, pavement protection impact plate, standard core-puller, and Utilibond mixing paddle.
Required Vehicle Specifications:
Wheelbase: 189
Cab to Axel: 108
Rear Overhang (AF): 47.5
62R: Transmission PTO Provision
99R: 6.4L V-8 Diesel or Gas Engine
44B: Torqshift 5-speed Auto Transmis
FORD F 450 or F550 4×2 Chassis Cab (or equivalent)
Available Coring Unit Options
Winterizing System
3000 watt inverter
Heavy duty tow package
Deck mounted access steps
Long Handled tool box upgrade
Core Hoist (500 lbs. capacity)
Stabilizer Deployed” warning system
Slider Master slide-out storage tray (70” x 30”)
Coring Unit Weight
Weight (water tank empty): 7500 lbs
Weight (water tank full): 8300 lbs.
Capacities:
Water Tank: 100 Gallons
Drum Speed: 0 – 280 RPM.
Coring Drum Diameter: up to 24”
Coring Drum Depth: up to 22”
True North HDD is your source for Directional Drills, Drill Rod, HDD Tooling, Tires, Tracks, and Undercarriage, Electronics, Sondes and Beacons, Mud Systems, Trencher Chains, Plow Blades.
True North HDD is your one-stop shop for all HDD needs.
Complete packages are always available at additional costs!
Trailers
Mud Systems
HDD Guidance Systems
Directional Drill Rod
Tooling
Parts
Financing is available on approved credit!
We have experience shipping worldwide!
Call Mark at (844) 787-8343 or at (204) 479-1297 • mark@truenorthhdd.com
Mitch at (402) 981-7371 • mitch@truenorthhdd.com
TrueNorthHDD.com